This Product Information Sheet is not intended to replace the Product Label. Always read the Product Label for the most current nutrient content and feeding directions.

Product #10620

Ultralyx® All In One 20% Breeder with Bioplex®

Product number: 10620


Product Information

  • Ideal for beef cattle on medium quality forages
  • Provides 18 g of supplemental magnesium per pound of intake to aid in the prevention of grass tetany
  • Highly palatable source or protein, magnesium, minerals and vitamins
  • Contains BIOPLEX trace minerals for improved mineral bioavailability resulting in better animal performance
  • No expensive bunks or feeders required, feed in container – refill/container-less option available

Feeding Instructions

CAUTION: Use as directed. Consumption of selenium should not exceed 3 mg per head day.

WARNING: This product, which contains added copper, should not be fed to sheep or any species with a low tolerance to supplemental copper.

Bioplex® is a registered trademark of Alltech.

Introductory Period:
Following a 7 to 10 day acclimation period, average consumption should be 0.5 to 1 pound per day for mature cattle with unrestricted forage supplies. Position the blocks 50 to 75 feet from loafing, feeding and watering areas. Some repositioning of blocks may be necessary as animals become acclimated to the presence of the blocks. Move blocks closer to increase consumption; further away to decrease consumption. If overconsumption occurs for more than two weeks and repositioning of blocks does not correct the situation, remove blocks and evaluate the overall feeding program. DO NOT ALLOW STARVED ANIMALS FREE ACCESS TO THIS BLOCK.

Feeding Recommendations:

  1. Provide 1 block per 15 to 30 head. All animals should have equal access to blocks. Timid and smaller animals need their share.
  2. Place blocks where animals congregate. Locate blocks throughout the pasture at loafing, grazing and watering areas. Adequate distance must be maintained between blocks to minimize crowding - 10 feet minimum.
  3. Feed blocks continuously along with a plentiful source of forage and clean, fresh water. Animals should not run out of blocks. When a block is two-thirds consumed, provide a new block near it.
  4. Cattle should consume 0.5 to 1 pound per head daily based on a 1,000-pound animal.
  5. Consumption of this block may vary depending upon animal body condition, quality and quantity of forages, seasonal weather conditions, and most importantly, feeding locations of blocks with respect to loafing, grazing, feeding and watering areas.
  6. Feed as the sole source of self-fed salt, minerals and vitamins. 

Nutrition Information

Crude Protein, Min20.00%
Crude Fat, Min3.50%
Crude Fiber, Max4.00%
Calcium, Min5.50%
Calcium, Max6.60%
Phosphorus, Min4.00%
Salt, Min7.25%
Salt, Max8.70%
Magnesium, Min4.00%
Copper, Min500 ppm
Manganese, Min1,000 ppm
Selenium, Min6.6 ppm
Zinc, Min2,000 ppm
Vitamin A, Min100,000 IU/lb
Vitamin D-3, Min20,000 IU/lb
Vitamin E, Min100 IU/lb

Product Ingredients

Processed Grain By-Products, Monocalcium Phosphate, Dicalcium Phosphate, Hydrolyzed Feather Meal, Magnesium Oxide, Salt, Calcium Hydroxide, Molasses Products, Hydrolyzed Vegetable Oil, Calcium Carbonate, Manganous Oxide, Manganese Sulfate, Manganese Proteinate, Zinc Oxide, Zinc Sulfate, Zinc Proteinate, Copper Sulfate, Copper Proteinate, Selenium Yeast, Brewers Dried Yeast, Ethylenediamine Dihydroiodide, Calcium Iodate, Cobalt Carbonate, Vitamin A Supplement, Vitamin D-3 Supplement, Vitamin E Supplement and Mineral Oil.